All MIBs › DOCS-LOADBALANCING-MIB › docsLoadBalChgOverCommit
docsLoadBalChgOverCommit
Module: DOCS-LOADBALANCING-MIB
OID (symbolic): DOCS-LOADBALANCING-MIB::docsLoadBalChgOverCommit
OID (numeric): 1.3.6.1.4.1.4491.2.1.2.1.2.1.6
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: The command to execute the DCC/UCC operation when set to true(1). The following are reasons for rejecting an SNMP SET to this object: - The MAC address in docsLoadBalChgOverMacAddr is not an existing MAC address in docsIfCmtsMacToCmEntry. - docsLoadBalChgOverCmd is ucc(3) and docsLoadBalChgOverUpChannelId is '-1', - docsLoadBalChgOverUpChannelId is '-1' and docsLoadBalChgOverDownFrequency is '0'. - DCC/UCC operation is currently being executed for the cable modem, on which the new command is committed, specifically if the value of docsLoadBalChgOverStatusValue is one of: messageSent(1), modemDeparting(4), waitToSendMessage(6). - An UCC operation is committed for a non-existing upstream channel ID or the corresponding ifOperStatus is down(2). - A DCC operation is committed for an invalid or non-existing downstream frequency, or the corresponding ifOperStatus is down(2). In those cases, the SET is rejected with an error code 'commitFailed'.
After processing the SNMP SET the information in docsLoadBalChgOverGroup is updated in a corresponding entry in docsLoadBalChgOverStatusEntry. Reading this object always returns false(2).
What is docsLoadBalChgOverCommit?
Setting this to true executes the manual channel-change operation configured in the other docsLoadBalChgOver* objects; the CMTS rejects the SET with 'commitFailed' if the target MAC address doesn't exist, the requested channel is invalid or down, or another change-over is already in progress for that modem, and reading this object always returns false.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.2.1.2.1.6 snmpwalk -v2c -c public <target> DOCS-LOADBALANCING-MIB::docsLoadBalChgOverCommit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.2.1.2.1.6.1 snmpget -v2c -c public <target> DOCS-LOADBALANCING-MIB::docsLoadBalChgOverCommit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4491.2.1.2.1.2.1.6.1 s <value>
Start monitoring DOCSIS CMTS headend equipment (load balancing, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-LOADBALANCING-MIB::docsLoadBalChgOverCommit OID value, configure state conditions and alerts, and monitor any DOCSIS CMTS headend equipment (load balancing, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.2 | docsLoadBalanceMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.2.1 | docsLoadBalMibObjects | DOCS-LOADBALANCING-MIB |
| 1.3.6.1.4.1.4491.2.1.2.1.2 | docsLoadBalChgOverObjects | DOCS-LOADBALANCING-MIB |
| 1.3.6.1.4.1.4491.2.1.2.1.2.1 | docsLoadBalChgOverGroup | DOCS-LOADBALANCING-MIB |
| 1.3.6.1.4.1.4491.2.1.2.1.2.1.6 | docsLoadBalChgOverCommit | DOCS-LOADBALANCING-MIB |