All MIBs › DOCS-BPI-MIB › docsBpiCmtsAuthCmReset
docsBpiCmtsAuthCmReset
Module: DOCS-BPI-MIB
OID (symbolic): DOCS-BPI-MIB::docsBpiCmtsAuthCmReset
OID (numeric): 1.3.6.1.2.1.10.127.5.1.2.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object to invalidateAuth(2) causes the CMTS to invalidate the current CM authorization key, but not to transmit an Authorization Invalid message nor to invalidate unicast TEKs. Setting this object to sendAuthInvalid(3) causes the CMTS to invalidate the current CM authorization key, and to transmit an Authorization Invalid message to the CM, but not to invalidate unicast TEKs. Setting this object to invalidateTeks(4) causes the CMTS to invalidate the current CM authorization key, to transmit an Authorization Invalid message to the CM, and to invalidate all unicast TEKs associated with this CM authorization. Reading this object returns the most-recently-set value of this object, or returns noResetRequested(1) if the object has not been set since the last CMTS reboot.
What is docsBpiCmtsAuthCmReset?
Controls how the CMTS forces a re-authorization cycle for this specific cable modem: invalidateAuth(2) silently invalidates the key, sendAuthInvalid(3) also notifies the CM, and invalidateTeks(4) additionally invalidates all its TEKs; reading returns the last value set, or noResetRequested(1) since the last CMTS reboot. An operator sets this to invalidateTeks(4) to force a full re-key of a suspect modem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.127.5.1.2.2.1.7 snmpwalk -v2c -c public <target> DOCS-BPI-MIB::docsBpiCmtsAuthCmReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.127.5.1.2.2.1.7.1 snmpget -v2c -c public <target> DOCS-BPI-MIB::docsBpiCmtsAuthCmReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.127.5.1.2.2.1.7.1 i <value>
Start monitoring Cable modem/CMTS implementing DOCSIS 1.0 Baseline Privacy (vendor-neutral, CableLabs/IETF standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DOCS-BPI-MIB::docsBpiCmtsAuthCmReset OID value, configure state conditions and alerts, and monitor any Cable modem/CMTS implementing DOCSIS 1.0 Baseline Privacy (vendor-neutral, CableLabs/IETF standard) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.127 | docsIfMib | DOCS-IETF-RFI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.127.5 | docsBpiMIB | DOCS-BPI-MIB |
| 1.3.6.1.2.1.10.127.5.1 | docsBpiMIBObjects | DOCS-BPI-MIB |
| 1.3.6.1.2.1.10.127.5.1.2 | docsBpiCmtsObjects | DOCS-BPI-MIB |
| 1.3.6.1.2.1.10.127.5.1.2.2 | docsBpiCmtsAuthTable | DOCS-BPI-MIB |
| 1.3.6.1.2.1.10.127.5.1.2.2.1 | docsBpiCmtsAuthEntry | DOCS-BPI-MIB |
| 1.3.6.1.2.1.10.127.5.1.2.2.1.7 | docsBpiCmtsAuthCmReset | DOCS-BPI-MIB |