DNOS-METRO-DOT1AG-PRIVATE-MIB :: agentDot1agCfmArchieveHoldTime

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DNOS-METRO-DOT1AG-PRIVATE-MIB › agentDot1agCfmArchieveHoldTime

agentDot1agCfmArchieveHoldTime

Module: DNOS-METRO-DOT1AG-PRIVATE-MIB

OID (symbolic): DNOS-METRO-DOT1AG-PRIVATE-MIB::agentDot1agCfmArchieveHoldTime

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specify Archieve Hold Time in Seconds. Time to hold the inactive Remote MEPs

What is agentDot1agCfmArchieveHoldTime?

This read-write integer (1-65535 seconds) specifies how long inactive Remote MEPs (Maintenance End Points) are retained in the archive before being purged. Admins tune it to control how long stale remote-endpoint records linger after a link or peer goes down, balancing troubleshooting history against table bloat. For instance, setting it to 3600 keeps an inactive remote MEP's record for one hour after it stops responding.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.1.1.2
snmpwalk -v2c -c public <target> DNOS-METRO-DOT1AG-PRIVATE-MIB::agentDot1agCfmArchieveHoldTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.1.1.2.1
snmpget -v2c -c public <target> DNOS-METRO-DOT1AG-PRIVATE-MIB::agentDot1agCfmArchieveHoldTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.1.1.2.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> agentDot1agCfmArchieveHoldTime.1

Start monitoring Dell Networking switch/router running DNOS (IEEE 802.1ag CFM, metro Ethernet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DNOS-METRO-DOT1AG-PRIVATE-MIB::agentDot1agCfmArchieveHoldTime OID value, configure state conditions and alerts, and monitor any Dell Networking switch/router running DNOS (IEEE 802.1ag CFM, metro Ethernet) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45fastPathDot1agPrivateMIBDNOS-METRO-DOT1AG-PRIVATE-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.1dot1agGlobalConfigGroupDNOS-METRO-DOT1AG-PRIVATE-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.1.1agentDot1agGlobalConfigGroupDNOS-METRO-DOT1AG-PRIVATE-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.45.1.1.2agentDot1agCfmArchieveHoldTimeDNOS-METRO-DOT1AG-PRIVATE-MIB