All MIBs › DNMSALARM-MIB › dnmsAlarmEntryEnable
dnmsAlarmEntryEnable
Module: DNMSALARM-MIB
OID (symbolic): DNMSALARM-MIB::dnmsAlarmEntryEnable
OID (numeric): 1.3.6.1.4.1.384.2.1.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Each alarm can be enabled/disabled individually.
This is expected to matter more as equivalent SNMP
style traps are implemented in MIBS for CPX boxes.
The overlapping traps (e.g. rfc1215's linkDown and
linkUp overlapping the X25 link down and ups) could
result in superfluous trap messages. These can be
avoided by selectively disabling some of these
traps.
What is dnmsAlarmEntryEnable?
This object enables or disables the individual alarm identified by that row's index, allowing finer control than the single global on/off switch. An administrator uses it to silence specific noisy or redundant alarms, the description specifically calls out overlapping traps like RFC1215's linkDown/linkUp duplicating the X.25 link alarms, while leaving other alarms active. Setting the entry for x25-lev1-dn to disable(2) would suppress that particular alarm without turning off alarm reporting for every other condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.384.2.1.2.1.2 snmpwalk -v2c -c public <target> DNMSALARM-MIB::dnmsAlarmEntryEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.384.2.1.2.1.2.1 snmpget -v2c -c public <target> DNMSALARM-MIB::dnmsAlarmEntryEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.384.2.1.2.1.2.1 i <value>
Start monitoring DNM-series network management system (alarm aggregation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DNMSALARM-MIB::dnmsAlarmEntryEnable OID value, configure state conditions and alerts, and monitor any DNM-series network management system (alarm aggregation) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.384 | dynatechCommunications | DYNATECHCOMMUNICATIONS-MIB |
| 1.3.6.1.4.1.384.2 | dynaCommGeneral | DYNATECHCOMMUNICATIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.384.2.1 | dnmsAlarm | DNMSALARM-MIB |
| 1.3.6.1.4.1.384.2.1.2 | dnmsAlarmTable | DNMSALARM-MIB |
| 1.3.6.1.4.1.384.2.1.2.1 | dnmsAlarmEntry | DNMSALARM-MIB |
| 1.3.6.1.4.1.384.2.1.2.1.2 | dnmsAlarmEntryEnable | DNMSALARM-MIB |