All MIBs › DNMSALARM-MIB › dnmsAlarmEnable
dnmsAlarmEnable
Module: DNMSALARM-MIB
OID (symbolic): DNMSALARM-MIB::dnmsAlarmEnable
OID (numeric): 1.3.6.1.4.1.384.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The on/off switch for the dnms style alarms
as SNMP traps. When enabled, any condition that
would generate an alarm in the DynaTech proprietary
management systems would instead generate a SNMP
style trap.
What is dnmsAlarmEnable?
This is the master on/off switch for DNMS-style alarms being sent as SNMP traps; when enabled, any condition that would normally raise an alarm in the vendor's proprietary DynaTech management system instead generates an SNMP trap. An administrator toggles this to integrate a legacy CPX device's alarm reporting into a standard SNMP-based monitoring system instead of a proprietary console. Setting this to enabled(1) means link failures, card faults, and other conditions will now arrive to the NMS as SNMP traps rather than only appearing in the vendor's own tool.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.384.2.1.1 snmpwalk -v2c -c public <target> DNMSALARM-MIB::dnmsAlarmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.384.2.1.1.1 snmpget -v2c -c public <target> DNMSALARM-MIB::dnmsAlarmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.384.2.1.1.1 i <value>
Start monitoring DNM-series network management system (alarm aggregation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DNMSALARM-MIB::dnmsAlarmEnable OID value, configure state conditions and alerts, and monitor any DNM-series network management system (alarm aggregation) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.384 | dynatechCommunications | DYNATECHCOMMUNICATIONS-MIB |
| 1.3.6.1.4.1.384.2 | dynaCommGeneral | DYNATECHCOMMUNICATIONS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.384.2.1 | dnmsAlarm | DNMSALARM-MIB |
| 1.3.6.1.4.1.384.2.1.1 | dnmsAlarmEnable | DNMSALARM-MIB |