DLINKSW-SAFEGUARD-ENGINE-MIB :: dSafeguardEngineNotifEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DLINKSW-SAFEGUARD-ENGINE-MIB › dSafeguardEngineNotifEnable

dSafeguardEngineNotifEnable

Module: DLINKSW-SAFEGUARD-ENGINE-MIB

OID (symbolic): DLINKSW-SAFEGUARD-ENGINE-MIB::dSafeguardEngineNotifEnable

OID (numeric): 1.3.6.1.4.1.171.26.19.1.1.1.5

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies whether the system sends notifications to the NMS.

What is dSafeguardEngineNotifEnable?

This value turns on or off SNMP trap notifications for Safeguard Engine state changes, letting the switch alert a management station whenever it enters or exits its protective, exhausted mode. An admin enables this so their monitoring system is informed automatically when the switch is under enough load to trigger CPU protection, rather than only discovering it by checking the state manually. For example, setting this to true would cause the switch to send a trap the moment dSafeguardEngineCurrentMode transitions from normal to exhausted.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.19.1.1.1.5
snmpwalk -v2c -c public <target> DLINKSW-SAFEGUARD-ENGINE-MIB::dSafeguardEngineNotifEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.19.1.1.1.5.1
snmpget -v2c -c public <target> DLINKSW-SAFEGUARD-ENGINE-MIB::dSafeguardEngineNotifEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.26.19.1.1.1.5.1 s <value>

Start monitoring D-Link switch, including industrial models (Safeguard Engine CPU protection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-SAFEGUARD-ENGINE-MIB::dSafeguardEngineNotifEnable OID value, configure state conditions and alerts, and monitor any D-Link switch, including industrial models (Safeguard Engine CPU protection) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.26dlinkIndustrialCommonDLINK-ID-REC-MIB
1.3.6.1.4.1.171.26.19dlinkSwCpuProtectMIBDLINKSW-CPU-PROTECT-MIB
1.3.6.1.4.1.171.26.19.1dCpuProtectMIBObjectsDLINKSW-CPU-PROTECT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.26.19.1.1dlinkSwSafeguardEngineMIBDLINKSW-SAFEGUARD-ENGINE-MIB
1.3.6.1.4.1.171.26.19.1.1.1dSafeguardEngineMIBObjectsDLINKSW-SAFEGUARD-ENGINE-MIB
1.3.6.1.4.1.171.26.19.1.1.1.5dSafeguardEngineNotifEnableDLINKSW-SAFEGUARD-ENGINE-MIB