All MIBs › DLINKSW-DOS-PREVENT-MIB › dDoSPrevCtrlRedirectPort
dDoSPrevCtrlRedirectPort
Module: DLINKSW-DOS-PREVENT-MIB
OID (symbolic): DLINKSW-DOS-PREVENT-MIB::dDoSPrevCtrlRedirectPort
OID (numeric): 1.3.6.1.4.1.171.26.59.1.3.1.4
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-write
Description: This object indicates the port to which the attacking packet will be redirected. A value of 0 means redirect port is unspecified. This object can only be modified for entries whose value of dDoSPrevCtrlEnabled is 'true' and dDoSPrevCtrlActionType is 'redirect'. Otherwise, inconsistentValue error will be returned.
What is dDoSPrevCtrlRedirectPort?
This read-write value specifies the interface index of the port to which matched attack traffic will be redirected, with 0 meaning no redirect port is specified. An admin sets it, per the source DESCRIPTION, only when dDoSPrevCtrlEnabled is true and dDoSPrevCtrlActionType is 'redirect'; any other combination causes the switch to reject the change with an inconsistentValue error. For example, an admin might set this to the ifIndex of a dedicated capture port so attack packets get forwarded there for offline analysis instead of being dropped.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.26.59.1.3.1.4 snmpwalk -v2c -c public <target> DLINKSW-DOS-PREVENT-MIB::dDoSPrevCtrlRedirectPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.26.59.1.3.1.4.1 snmpget -v2c -c public <target> DLINKSW-DOS-PREVENT-MIB::dDoSPrevCtrlRedirectPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.26.59.1.3.1.4.1 s <value>
Start monitoring D-Link managed switch (DoS attack prevention) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINKSW-DOS-PREVENT-MIB::dDoSPrevCtrlRedirectPort OID value, configure state conditions and alerts, and monitor any D-Link managed switch (DoS attack prevention) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.26 | dlinkIndustrialCommon | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.26.59 | dlinkSwDosPrevMIB | DLINKSW-DOS-PREVENT-MIB |
| 1.3.6.1.4.1.171.26.59.1 | dDosPrevMIBObjects | DLINKSW-DOS-PREVENT-MIB |
| 1.3.6.1.4.1.171.26.59.1.3 | dDosPrevCtrlTable | DLINKSW-DOS-PREVENT-MIB |
| 1.3.6.1.4.1.171.26.59.1.3.1 | dDosPrevCtrlEntry | DLINKSW-DOS-PREVENT-MIB |
| 1.3.6.1.4.1.171.26.59.1.3.1.4 | dDoSPrevCtrlRedirectPort | DLINKSW-DOS-PREVENT-MIB |