DLINK-L2MGMT-MIB :: swIGMPCtrlTimer

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DLINK-L2MGMT-MIB › swIGMPCtrlTimer

swIGMPCtrlTimer

Module: DLINK-L2MGMT-MIB

OID (symbolic): DLINK-L2MGMT-MIB::swIGMPCtrlTimer

OID (numeric): 1.3.6.1.4.1.171.12.2.3.3.1.5

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The timer value for sending IGMP query packet when none was sent by the multicast router in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997. And it recommends a default of 125 seconds. The timeout value must be at least 30 seconds.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.2.3.3.1.5
snmpwalk -v2c -c public <target> DLINK-L2MGMT-MIB::swIGMPCtrlTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.2.3.3.1.5.1
snmpget -v2c -c public <target> DLINK-L2MGMT-MIB::swIGMPCtrlTimer.1

Start monitoring D-Link managed switch (Layer 2 trunk/IGMP management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DLINK-L2MGMT-MIB::swIGMPCtrlTimer OID value, configure state conditions and alerts, and monitor any D-Link managed switch (Layer 2 trunk/IGMP management) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.12dlink_common_mgmtDLINK-ID-REC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.12.2swDlinkL2MgmtDLINK-L2MGMT-MIB
1.3.6.1.4.1.171.12.2.3swIGMPPackageDLINK-L2MGMT-MIB
1.3.6.1.4.1.171.12.2.3.3swIGMPCtrlTableDLINK-L2MGMT-MIB
1.3.6.1.4.1.171.12.2.3.3.1swIGMPCtrlEntryDLINK-L2MGMT-MIB
1.3.6.1.4.1.171.12.2.3.3.1.5swIGMPCtrlTimerDLINK-L2MGMT-MIB