DKT-RMON-MIB :: rmonWANPortGetOutFCSErr

MIB Reference — IPNetwork Monitor · Updated September 26, 2026

All MIBs › DKT-RMON-MIB › rmonWANPortGetOutFCSErr

rmonWANPortGetOutFCSErr

Module: DKT-RMON-MIB

OID (symbolic): DKT-RMON-MIB::rmonWANPortGetOutFCSErr

OID (numeric): 1.3.6.1.4.1.27304.13.4.2.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The number of frames transmitted incorrectly due to an internal MAC transmit error, for example, bad CRC detected when the frame was read from memory

What is rmonWANPortGetOutFCSErr?

Counts frames the WAN port failed to transmit correctly because of an internal MAC transmit error, such as a bad CRC detected when the frame was pulled from memory. This is a hardware/board-level fault indicator rather than a wiring problem, so a nonzero count here can mean a failing switch ASIC or memory fault rather than a bad cable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.27304.13.4.2.4
snmpwalk -v2c -c public <target> DKT-RMON-MIB::rmonWANPortGetOutFCSErr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.27304.13.4.2.4.1
snmpget -v2c -c public <target> DKT-RMON-MIB::rmonWANPortGetOutFCSErr.1

Start monitoring DKT A/S Ethernet switch (RMON statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKT-RMON-MIB::rmonWANPortGetOutFCSErr OID value, configure state conditions and alerts, and monitor any DKT A/S Ethernet switch (RMON statistics) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.27304dktDKT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.27304.13rmonMIBDKT-RMON-MIB
1.3.6.1.4.1.27304.13.4rmonPortsDKT-RMON-MIB
1.3.6.1.4.1.27304.13.4.2rmonWANPortDKT-RMON-MIB
1.3.6.1.4.1.27304.13.4.2.4rmonWANPortGetOutFCSErrDKT-RMON-MIB