All MIBs › DKT-RMON-MIB › rmonCPUPortGetLate
rmonCPUPortGetLate
Module: DKT-RMON-MIB
OID (symbolic): DKT-RMON-MIB::rmonCPUPortGetLate
OID (numeric): 1.3.6.1.4.1.27304.13.4.1.32
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The number of Late collision events seen by the MAC
What is rmonCPUPortGetLate?
Counts 'late collision' events on the CPU port, i.e. collisions detected after the point in the frame where they should no longer occur under normal Ethernet timing. Late collisions almost always indicate a duplex mismatch or a cable run that is too long, and should be treated as a wiring or configuration problem rather than routine noise.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.27304.13.4.1.32 snmpwalk -v2c -c public <target> DKT-RMON-MIB::rmonCPUPortGetLate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.27304.13.4.1.32.1 snmpget -v2c -c public <target> DKT-RMON-MIB::rmonCPUPortGetLate.1
Start monitoring DKT A/S Ethernet switch (RMON statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKT-RMON-MIB::rmonCPUPortGetLate OID value, configure state conditions and alerts, and monitor any DKT A/S Ethernet switch (RMON statistics) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.27304 | dkt | DKT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.27304.13 | rmonMIB | DKT-RMON-MIB |
| 1.3.6.1.4.1.27304.13.4 | rmonPorts | DKT-RMON-MIB |
| 1.3.6.1.4.1.27304.13.4.1 | rmonCPUPort | DKT-RMON-MIB |
| 1.3.6.1.4.1.27304.13.4.1.32 | rmonCPUPortGetLate | DKT-RMON-MIB |