All MIBs › DKSF-70-5-X-X-1 › npSmokeReset
npSmokeReset
Module: DKSF-70-5-X-X-1
OID (symbolic): DKSF-70-5-X-X-1::npSmokeReset
OID (numeric): 1.3.6.1.4.1.25728.8200.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Write 1 to switch off for approx. 10s to reset sensor
What is npSmokeReset?
Writing 1 to this object switches this smoke sensor off for about 10 seconds and back on, resetting it. An admin uses this to clear a stuck or falsely-alarming smoke sensor remotely without visiting the site.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8200.1.1.4 snmpwalk -v2c -c public <target> DKSF-70-5-X-X-1::npSmokeReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8200.1.1.4.1 snmpget -v2c -c public <target> DKSF-70-5-X-X-1::npSmokeReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8200.1.1.4.1 i <value>
Start monitoring NetPing DKSF-70 remote sensing/relay device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-5-X-X-1::npSmokeReset OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing/relay device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8200 | npSmoke | DKSF-48-4-X-X-1 |
| 1.3.6.1.4.1.25728.8200.1 | npSmokeTable | DKSF-48-4-X-X-1 |
| 1.3.6.1.4.1.25728.8200.1.1 | npSmokeEntry | DKSF-48-4-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8200.1.1.4 | npSmokeReset | DKSF-70-5-X-X-1 |