All MIBs › DKSF-70-5-X-X-1 › npSmokePower
npSmokePower
Module: DKSF-70-5-X-X-1
OID (symbolic): DKSF-70-5-X-X-1::npSmokePower
OID (numeric): 1.3.6.1.4.1.25728.8200.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls power on Smoke sensor current loop
What is npSmokePower?
This controls power to this smoke sensor's current loop, off or on. An admin might turn this off temporarily during maintenance to avoid spurious smoke alarms, remembering to restore power afterward.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8200.1.1.3 snmpwalk -v2c -c public <target> DKSF-70-5-X-X-1::npSmokePower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8200.1.1.3.1 snmpget -v2c -c public <target> DKSF-70-5-X-X-1::npSmokePower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8200.1.1.3.1 i <value>
Start monitoring NetPing DKSF-70 remote sensing/relay device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-5-X-X-1::npSmokePower OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing/relay device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8200 | npSmoke | DKSF-48-4-X-X-1 |
| 1.3.6.1.4.1.25728.8200.1 | npSmokeTable | DKSF-48-4-X-X-1 |
| 1.3.6.1.4.1.25728.8200.1.1 | npSmokeEntry | DKSF-48-4-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8200.1.1.3 | npSmokePower | DKSF-70-5-X-X-1 |