All MIBs › DISMAN-EVENT-MIB › mteTriggerThresholdDeltaRising
mteTriggerThresholdDeltaRising
Module: DISMAN-EVENT-MIB
OID (symbolic): DISMAN-EVENT-MIB::mteTriggerThresholdDeltaRising
OID (numeric): 1.3.6.1.2.1.88.1.2.6.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: A threshold value to check against if mteTriggerType is 'threshold'.
When the delta value (difference) between the current sampled value (value(n)) and the previous sampled value (value(n-1)) is greater than or equal to this threshold, and the delta value calculated at the last sampling interval (i.e. value(n-1) - value(n-2)) was less than this threshold, one mteTriggerThresholdDeltaRisingEvent is triggered. That event is also triggered if the first delta value calculated after this entry becomes active, i.e. value(2) - value(1), where value(1) is the first sample taken of that instance, is greater than or equal to this threshold.
After a rising event is generated, another such event is not triggered until the delta value falls below this threshold and reaches mteTriggerThresholdDeltaFalling.
What is mteTriggerThresholdDeltaRising?
This is the numeric threshold (default 0) applied to the delta (difference) between consecutive samples rather than the raw value: when the delta rises to or above this threshold after previously being below it, one mteTriggerThresholdDeltaRisingEvent fires. Use delta thresholds instead of plain thresholds when you care about the rate of change of a counter, not its absolute level.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.88.1.2.6.1.4 snmpwalk -v2c -c public <target> DISMAN-EVENT-MIB::mteTriggerThresholdDeltaRising
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.88.1.2.6.1.4.1 snmpget -v2c -c public <target> DISMAN-EVENT-MIB::mteTriggerThresholdDeltaRising.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.88.1.2.6.1.4.1 i <value>
Start monitoring SNMP-capable network device or management station (vendor-neutral, DISMAN event triggers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DISMAN-EVENT-MIB::mteTriggerThresholdDeltaRising OID value, configure state conditions and alerts, and monitor any SNMP-capable network device or management station (vendor-neutral, DISMAN event triggers) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.88 | dismanEventMIB | DISMAN-EVENT-MIB |
| 1.3.6.1.2.1.88.1 | dismanEventMIBObjects | DISMAN-EVENT-MIB |
| 1.3.6.1.2.1.88.1.2 | mteTrigger | DISMAN-EVENT-MIB |
| 1.3.6.1.2.1.88.1.2.6 | mteTriggerThresholdTable | DISMAN-EVENT-MIB |
| 1.3.6.1.2.1.88.1.2.6.1 | mteTriggerThresholdEntry | DISMAN-EVENT-MIB |
| 1.3.6.1.2.1.88.1.2.6.1.4 | mteTriggerThresholdDeltaRising | DISMAN-EVENT-MIB |