DIAL-CONTROL-MIB :: dialCtlPeerStatsLastDisconnectText

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDIAL-CONTROL-MIBdialCtlPeerStatsLastDisconnectText

dialCtlPeerStatsLastDisconnectText

Module: DIAL-CONTROL-MIB

OID (symbolic): DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText

OID (numeric): 1.3.6.1.2.1.10.21.1.2.2.1.8

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-only

Description: ASCII text describing the reason for the last call termination.

This object exists because it would be impossible for a management station to store all possible cause values for all types of interfaces. It should be used only if a management station is unable to decode the value of dialCtlPeerStatsLastDisconnectCause.

This object will be updated whenever a call is started or cleared.

What is dialCtlPeerStatsLastDisconnectText?

This text string provides a human-readable description of why the last call to this peer terminated, translating the encoded cause code into plain English. When a management station cannot decode cause codes, this field lets operators understand the failure reason directly without vendor manuals. Example value: 'No route to peer.'

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.21.1.2.2.1.8
snmpwalk -v2c -c public <target> DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.21.1.2.2.1.8.1
snmpget -v2c -c public <target> DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.1

Start monitoring Router/access server with ISDN/dial-on-demand WAN interface (vendor-neutral, RFC 2128) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText OID value, configure state conditions and alerts, and monitor any Router/access server with ISDN/dial-on-demand WAN interface (vendor-neutral, RFC 2128) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
Numeric OIDNameModule
1.3.6.1.2.1.10.21dialControlMibDIAL-CONTROL-MIB
1.3.6.1.2.1.10.21.1dialControlMibObjectsDIAL-CONTROL-MIB
1.3.6.1.2.1.10.21.1.2dialCtlPeerDIAL-CONTROL-MIB
1.3.6.1.2.1.10.21.1.2.2dialCtlPeerStatsTableDIAL-CONTROL-MIB
1.3.6.1.2.1.10.21.1.2.2.1dialCtlPeerStatsEntryDIAL-CONTROL-MIB
1.3.6.1.2.1.10.21.1.2.2.1.8dialCtlPeerStatsLastDisconnectTextDIAL-CONTROL-MIB