All MIBs › DIAL-CONTROL-MIB › dialCtlPeerCfgInactivityTimer
dialCtlPeerCfgInactivityTimer
Module: DIAL-CONTROL-MIB
OID (symbolic): DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer
OID (numeric): 1.3.6.1.2.1.10.21.1.2.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description:
The connection will be automatically disconnected if no longer carrying useful data for a time period, in seconds, specified in this object. Useful data in this context refers to forwarding packets, including routing information; it excludes the encapsulator maintenance frames. A value of zero means the connection will not be automatically taken down due to inactivity, which implies that it is a dedicated circuit.
What is dialCtlPeerCfgInactivityTimer?
This read-write number specifies how many seconds of data inactivity must pass before the device automatically disconnects the call, or zero to keep the connection active indefinitely. Engineers use this to prevent idle expensive dial-up links from consuming carrier charges when they're not actively carrying traffic. A backup ISP link might be set to 300 seconds (5 minutes) so unused WAN bandwidth is released without manual intervention.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.21 | dialControlMib | DIAL-CONTROL-MIB |
| 1.3.6.1.2.1.10.21.1 | dialControlMibObjects | DIAL-CONTROL-MIB |
| 1.3.6.1.2.1.10.21.1.2 | dialCtlPeer | DIAL-CONTROL-MIB |
| 1.3.6.1.2.1.10.21.1.2.1 | dialCtlPeerCfgTable | DIAL-CONTROL-MIB |
| 1.3.6.1.2.1.10.21.1.2.1.1 | dialCtlPeerCfgEntry | DIAL-CONTROL-MIB |
| 1.3.6.1.2.1.10.21.1.2.1.1.11 | dialCtlPeerCfgInactivityTimer | DIAL-CONTROL-MIB |