DGS3627-SWL3MGMT-MIB :: swL3IpCtrlIpDhcpOption12HostName

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS3627-SWL3MGMT-MIB › swL3IpCtrlIpDhcpOption12HostName

swL3IpCtrlIpDhcpOption12HostName

Module: DGS3627-SWL3MGMT-MIB

OID (symbolic): DGS3627-SWL3MGMT-MIB::swL3IpCtrlIpDhcpOption12HostName

OID (numeric): 1.3.6.1.4.1.171.11.70.6.3.2.1.3.1.23

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12.

What is swL3IpCtrlIpDhcpOption12HostName?

Specifies the host name string inserted into DHCP option 12 on this interface's DHCPDISCOVER/DHCPREQUEST messages when that option is enabled; per its own DESCRIPTION it must start and end with a letter or digit, use only letters/digits/hyphens internally, and is limited to 63 characters. Setting it to an empty string clears the custom name and reverts option 12 encoding to its default value.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.70.6.3.2.1.3.1.23
snmpwalk -v2c -c public <target> DGS3627-SWL3MGMT-MIB::swL3IpCtrlIpDhcpOption12HostName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.70.6.3.2.1.3.1.23.1
snmpget -v2c -c public <target> DGS3627-SWL3MGMT-MIB::swL3IpCtrlIpDhcpOption12HostName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.70.6.3.2.1.3.1.23.1 s <value>

Start monitoring D-Link DGS-3627 Layer 3 switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3627-SWL3MGMT-MIB::swL3IpCtrlIpDhcpOption12HostName OID value, configure state conditions and alerts, and monitor any D-Link DGS-3627 Layer 3 switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.11dlink_mgmtDES2218-MIB
1.3.6.1.4.1.171.11.70dgsProjectXStackIISeriesProdSW34XXPRIMGMT-MIB
1.3.6.1.4.1.171.11.70.6dgs3627SW36XXPRIMGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.11.70.6.3swL3MgmtMIBDGS3627-SWL3MGMT-MIB
1.3.6.1.4.1.171.11.70.6.3.2swL3IpMgmtDGS3627-SWL3MGMT-MIB
1.3.6.1.4.1.171.11.70.6.3.2.1swL3IpCtrlMgmtDGS3627-SWL3MGMT-MIB
1.3.6.1.4.1.171.11.70.6.3.2.1.3swL3IpCtrlTableDGS3627-SWL3MGMT-MIB
1.3.6.1.4.1.171.11.70.6.3.2.1.3.1swL3IpCtrlEntryDGS3627-SWL3MGMT-MIB
1.3.6.1.4.1.171.11.70.6.3.2.1.3.1.23swL3IpCtrlIpDhcpOption12HostNameDGS3627-SWL3MGMT-MIB