All MIBs › DGS3324SRi-SWL2MGMT-MIB › swL2TrafficCtrlBMStromthreshold
swL2TrafficCtrlBMStromthreshold
Module: DGS3324SRi-SWL2MGMT-MIB
OID (symbolic): DGS3324SRi-SWL2MGMT-MIB::swL2TrafficCtrlBMStromthreshold
OID (numeric): 1.3.6.1.4.1.171.11.59.4.2.13.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlDlfStromCtrl objects whether is enabled) will active storm control. Whenever a port reaches its configured amount of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will start forwarding that type of packet.
What is swL2TrafficCtrlBMStromthreshold?
This column sets the broadcast, multicast, or unknown-unicast storm threshold, in thousands of packets per second, above which the switch begins dropping that traffic type on the port for the remainder of the one-second interval -- whichever of swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl, or swL2TrafficCtrlDlfStromCtrl is enabled determines which traffic types this threshold applies to. Once the interval ends, the switch resumes forwarding that traffic type normally.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.59.4.2.13.1.1.3 snmpwalk -v2c -c public <target> DGS3324SRi-SWL2MGMT-MIB::swL2TrafficCtrlBMStromthreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.59.4.2.13.1.1.3.1 snmpget -v2c -c public <target> DGS3324SRi-SWL2MGMT-MIB::swL2TrafficCtrlBMStromthreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.59.4.2.13.1.1.3.1 i <value>
Start monitoring D-Link DGS-3324SRi stackable Layer 2 switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3324SRi-SWL2MGMT-MIB::swL2TrafficCtrlBMStromthreshold OID value, configure state conditions and alerts, and monitor any D-Link DGS-3324SRi stackable Layer 2 switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.59 | dgsProjectXSeriesProd | SW-PROJECTX-SRPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.59.4 | dgs3324SRi | SW-PROJECTX-SRPRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.59.4.2 | swL2MgmtMIB | DGS3324SRi-SWL2MGMT-MIB |
| 1.3.6.1.4.1.171.11.59.4.2.13 | swL2TrafficMgmt | DGS3324SRi-SWL2MGMT-MIB |
| 1.3.6.1.4.1.171.11.59.4.2.13.1 | swL2TrafficCtrlTable | DGS3324SRi-SWL2MGMT-MIB |
| 1.3.6.1.4.1.171.11.59.4.2.13.1.1 | swL2TrafficCtrlEntry | DGS3324SRi-SWL2MGMT-MIB |
| 1.3.6.1.4.1.171.11.59.4.2.13.1.1.3 | swL2TrafficCtrlBMStromthreshold | DGS3324SRi-SWL2MGMT-MIB |