All MIBs › DGS3224-L2MGMT-MIB › swDevInfoFrontPanelLedStatus
swDevInfoFrontPanelLedStatus
Module: DGS3224-L2MGMT-MIB
OID (symbolic): DGS3224-L2MGMT-MIB::swDevInfoFrontPanelLedStatus
OID (numeric): 1.3.6.1.4.1.171.11.101.3.2.1.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This object is a set of system LED indications.
The first four octets are defined as system LED. The first two octets are currently unused and must be set to zero. The third octet indicates the power LED. The fourth octet indicates the console LED. The fifth LED is RPS (Redundancy Power Supply) LED. The sixth LED is SD card LED, the following description is for SD card LED: 01 = SD card is not present. 02 = SD card is present. 03 = fails to read/write SD card. 04 = read/write SD card successfully.
The other octets are the logical port LED. Every two bytes are presented to a port. The first byte is presented as the Link/Activity LED. The second byte is presented as the Speed LED.
System LED: 01 = fail/error/non existence. 02 = work normal
Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks.
The second most significant bit is used for link status: 1 = link fail. 2 = link pass.
Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps.
The four remaining bits are currently unused and must be 0.
What is swDevInfoFrontPanelLedStatus?
An octet string encoding the state of every front-panel LED - system, power, console, RPS, SD card, and per-port link/activity and speed LEDs - using documented byte codes (e.g. 01/02 for SD card presence, 1/2 for link fail/pass). Network management software polls this to render a virtual front panel without physically inspecting the device, decoding a byte value of 2 as link-pass and 3 as 1000Mbps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.101.3.2.1.1.4 snmpwalk -v2c -c public <target> DGS3224-L2MGMT-MIB::swDevInfoFrontPanelLedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.101.3.2.1.1.4.1 snmpget -v2c -c public <target> DGS3224-L2MGMT-MIB::swDevInfoFrontPanelLedStatus.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> swDevInfoFrontPanelLedStatus.1
Start monitoring D-Link DGS-3224 switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3224-L2MGMT-MIB::swDevInfoFrontPanelLedStatus OID value, configure state conditions and alerts, and monitor any D-Link DGS-3224 switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.101 | dlink_Dgs3200Series | SW3200PRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.101.3 | dgs3224 | SW3200PRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.101.3.2 | swL2MgmtMIB | DGS3224-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.101.3.2.1 | swL2DevMgmt | DGS3224-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.101.3.2.1.1 | swL2DevInfo | DGS3224-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.101.3.2.1.1.4 | swDevInfoFrontPanelLedStatus | DGS3224-L2MGMT-MIB |