All MIBs › DGS3200-L2MGMT-MIB › swDevInfoFrontPanelLedStatus
swDevInfoFrontPanelLedStatus
Module: DGS3200-L2MGMT-MIB
OID (symbolic): DGS3200-L2MGMT-MIB::swDevInfoFrontPanelLedStatus
OID (numeric): 1.3.6.1.4.1.171.11.101.1.2.1.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This object is a set of system LED indications.
The first four octets are defined as system LED. The first two octets are currently unused and must be set to zero. The third octet indicates the power LED. The fourth octet indicates the console LED. The fifth LED is RPS (Redundancy Power Supply) LED.
The other octets are the logical port LED. Every two bytes are presented to a port. The first byte is presented as the Link/Activity LED. The second byte is presented as the Speed LED.
System LED: 01 = fail/error/non existence. 02 = work normal
Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks.
The second most significant bit is used for link status: 1 = link fail. 2 = link pass.
Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps.
The four remaining bits are currently unused and must be 0.
What is swDevInfoFrontPanelLedStatus?
Encodes the switch's front-panel LED states as a byte string: fixed system LEDs (power, console, RPS) followed by two bytes per logical port for Link/Activity and Speed. A management tool decodes this to render an on-screen LED panel, e.g. a port's first byte's low bit set to 2 meaning link-pass, without a technician looking at the chassis.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.101.1.2.1.1.4 snmpwalk -v2c -c public <target> DGS3200-L2MGMT-MIB::swDevInfoFrontPanelLedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.101.1.2.1.1.4.1 snmpget -v2c -c public <target> DGS3200-L2MGMT-MIB::swDevInfoFrontPanelLedStatus.1
Start monitoring D-Link DGS-3200 switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS3200-L2MGMT-MIB::swDevInfoFrontPanelLedStatus OID value, configure state conditions and alerts, and monitor any D-Link DGS-3200 switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.101 | dlink_Dgs3200Series | SW3200PRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.101.1 | dgs3200 | SW3200PRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.101.1.2 | swL2MgmtMIB | DGS3200-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.101.1.2.1 | swL2DevMgmt | DGS3200-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.101.1.2.1.1 | swL2DevInfo | DGS3200-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.101.1.2.1.1.4 | swDevInfoFrontPanelLedStatus | DGS3200-L2MGMT-MIB |