DGS-1248T-BX-MIB :: portTrunkMember

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS-1248T-BX-MIB › portTrunkMember

portTrunkMember

Module: DGS-1248T-BX-MIB

OID (symbolic): DGS-1248T-BX-MIB::portTrunkMember

OID (numeric): 1.3.6.1.4.1.171.10.76.6.14.1.1.3

Node type: OBJECT-TYPE

Type: PortList

Access: read-write

Description: A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.

What is portTrunkMember?

Bitmap of which physical ports (0 to the port count) are members of this trunk group, one bit per port. An admin sets the corresponding bits to combine multiple physical links into a single logical aggregated link.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.76.6.14.1.1.3
snmpwalk -v2c -c public <target> DGS-1248T-BX-MIB::portTrunkMember

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.76.6.14.1.1.3.1
snmpget -v2c -c public <target> DGS-1248T-BX-MIB::portTrunkMember.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.76.6.14.1.1.3.1 s <value>

Start monitoring D-Link DGS-1248T switch (BX hardware revision) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-1248T-BX-MIB::portTrunkMember OID value, configure state conditions and alerts, and monitor any D-Link DGS-1248T switch (BX hardware revision) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
1.3.6.1.4.1.171.10.76dlink_DGS12XXTSeriesProdDGS-1216T-DX-MIB
1.3.6.1.4.1.171.10.76.6dgs_1248tb1DGS-1248T-B1-MIB
1.3.6.1.4.1.171.10.76.6.14companyPortTrunkGroupDGS-1248T-B1-MIB
1.3.6.1.4.1.171.10.76.6.14.1portTrunkTableDGS-1248T-B1-MIB
1.3.6.1.4.1.171.10.76.6.14.1.1portTrunkEntryDGS-1248T-B1-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.10.76.6.14.1.1.3portTrunkMemberDGS-1248T-BX-MIB