All MIBs › DGS-1248T-BX-MIB › igsLeaveProcessInterval
igsLeaveProcessInterval
Module: DGS-1248T-BX-MIB
OID (symbolic): DGS-1248T-BX-MIB::igsLeaveProcessInterval
OID (numeric): 1.3.6.1.4.1.171.10.76.6.22.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is the interval (in seconds) after which a Leave message is forwarded on either router port(if present) or on all ports of a bridge (if no router port present).
when a leave message from a host for a group is received by the bridge, The bridge will form a group-specific query and sends it on the port on which the leave message is received. A timer is started by a bridge with a time interval equal to IgsLeaveProcessInterval.
If a report message is received before above timer expires, Leave message is dropped.Otherwise Leave message is either forwarded on all ports of the bridge or only on router port depending upon the case.
What is igsLeaveProcessInterval?
How long, in seconds (0-25, default 1), the switch waits after receiving an IGMP leave before forwarding it on (to the router port or all ports), giving time for another host on the same segment to respond with a report and cancel the leave. Tuning this trades off faster leave processing against unnecessarily dropping a group that still has other members.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.76.6.22.1.7 snmpwalk -v2c -c public <target> DGS-1248T-BX-MIB::igsLeaveProcessInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.76.6.22.1.7.1 snmpget -v2c -c public <target> DGS-1248T-BX-MIB::igsLeaveProcessInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.76.6.22.1.7.1 i <value>
Start monitoring D-Link DGS-1248T switch (BX hardware revision) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-1248T-BX-MIB::igsLeaveProcessInterval OID value, configure state conditions and alerts, and monitor any D-Link DGS-1248T switch (BX hardware revision) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.10 | dlink_products | DES-1226G-MIB |
| 1.3.6.1.4.1.171.10.76 | dlink_DGS12XXTSeriesProd | DGS-1216T-DX-MIB |
| 1.3.6.1.4.1.171.10.76.6 | dgs_1248tb1 | DGS-1248T-B1-MIB |
| 1.3.6.1.4.1.171.10.76.6.22 | companyIgsGroup | DGS-1248T-B1-MIB |
| 1.3.6.1.4.1.171.10.76.6.22.1 | igsSystem | DGS-1248T-B1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.10.76.6.22.1.7 | igsLeaveProcessInterval | DGS-1248T-BX-MIB |