DGS-1248T-BX-MIB :: configSNMPEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS-1248T-BX-MIB › configSNMPEnable

configSNMPEnable

Module: DGS-1248T-BX-MIB

OID (symbolic): DGS-1248T-BX-MIB::configSNMPEnable

OID (numeric): 1.3.6.1.4.1.171.10.76.6.11.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Enable/Disable SNMP function. A (1) enables, a (2) disables.

What is configSNMPEnable?

Globally enables or disables the SNMP agent on the switch. Disabling it blocks all SNMP-based monitoring and management of the device, including through this very MIB, so it's normally left enabled once configured.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.76.6.11.9
snmpwalk -v2c -c public <target> DGS-1248T-BX-MIB::configSNMPEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.76.6.11.9.1
snmpget -v2c -c public <target> DGS-1248T-BX-MIB::configSNMPEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.76.6.11.9.1 i <value>

Start monitoring D-Link DGS-1248T switch (BX hardware revision) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-1248T-BX-MIB::configSNMPEnable OID value, configure state conditions and alerts, and monitor any D-Link DGS-1248T switch (BX hardware revision) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
1.3.6.1.4.1.171.10.76dlink_DGS12XXTSeriesProdDGS-1216T-DX-MIB
1.3.6.1.4.1.171.10.76.6dgs_1248tb1DGS-1248T-B1-MIB
1.3.6.1.4.1.171.10.76.6.11companyConfigGroupDGS-1248T-B1-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.10.76.6.11.9configSNMPEnableDGS-1248T-BX-MIB