DGS-1248T-B1-MIB :: portTrunkMember

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS-1248T-B1-MIB › portTrunkMember

portTrunkMember

Module: DGS-1248T-B1-MIB

OID (symbolic): DGS-1248T-B1-MIB::portTrunkMember

OID (numeric): 1.3.6.1.4.1.171.10.76.6.14.1.1.3

Node type: OBJECT-TYPE

Type: PortList

Access: read-write

Description: A port trunk member value indicates which port is a member of the specified trunk. Valid values are in the range from 0 to ifNumber. A zero indicates that no port is contained in the specifed member. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.

What is portTrunkMember?

This is a bitmap of which physical ports are bundled into a given trunk group, with each bit representing one port and a value of 0 meaning no ports assigned. An admin sets the bits for, say, ports 9 and 10 to combine them into a single aggregated uplink for extra bandwidth and redundancy.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.76.6.14.1.1.3
snmpwalk -v2c -c public <target> DGS-1248T-B1-MIB::portTrunkMember

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.76.6.14.1.1.3.1
snmpget -v2c -c public <target> DGS-1248T-B1-MIB::portTrunkMember.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.76.6.14.1.1.3.1 s <value>

Start monitoring D-Link Gigabit smart switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-1248T-B1-MIB::portTrunkMember OID value, configure state conditions and alerts, and monitor any D-Link Gigabit smart switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
1.3.6.1.4.1.171.10.76dlink_DGS12XXTSeriesProdDGS-1216T-DX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.10.76.6dgs_1248tb1DGS-1248T-B1-MIB
1.3.6.1.4.1.171.10.76.6.14companyPortTrunkGroupDGS-1248T-B1-MIB
1.3.6.1.4.1.171.10.76.6.14.1portTrunkTableDGS-1248T-B1-MIB
1.3.6.1.4.1.171.10.76.6.14.1.1portTrunkEntryDGS-1248T-B1-MIB
1.3.6.1.4.1.171.10.76.6.14.1.1.3portTrunkMemberDGS-1248T-B1-MIB