All MIBs › DGS-1248T-B1-MIB › configMirrorTXSrc
configMirrorTXSrc
Module: DGS-1248T-B1-MIB
OID (symbolic): DGS-1248T-B1-MIB::configMirrorTXSrc
OID (numeric): 1.3.6.1.4.1.171.10.76.6.11.8.1.3
Node type: OBJECT-TYPE
Type: PortList
Access: read-write
Description: When mirroring is enabled , this identifies the TX mirroring source port.This value has a valid range of 1 to ifNumber when enbaled.Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc.Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
What is configMirrorTXSrc?
This is a bitmap selecting which ports have their transmitted (outbound) traffic copied to the mirror monitor port, with each bit representing one port. An admin sets the bits for the ports they want to inspect, e.g. to capture what a suspect device is sending out.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.76.6.11.8.1.3 snmpwalk -v2c -c public <target> DGS-1248T-B1-MIB::configMirrorTXSrc
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.76.6.11.8.1.3.1 snmpget -v2c -c public <target> DGS-1248T-B1-MIB::configMirrorTXSrc.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.76.6.11.8.1.3.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> configMirrorTXSrc.1
Start monitoring D-Link Gigabit smart switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-1248T-B1-MIB::configMirrorTXSrc OID value, configure state conditions and alerts, and monitor any D-Link Gigabit smart switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.10 | dlink_products | DES-1226G-MIB |
| 1.3.6.1.4.1.171.10.76 | dlink_DGS12XXTSeriesProd | DGS-1216T-DX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.10.76.6 | dgs_1248tb1 | DGS-1248T-B1-MIB |
| 1.3.6.1.4.1.171.10.76.6.11 | companyConfigGroup | DGS-1248T-B1-MIB |
| 1.3.6.1.4.1.171.10.76.6.11.8 | configMirrorTable | DGS-1248T-B1-MIB |
| 1.3.6.1.4.1.171.10.76.6.11.8.1 | configMirrorEntry | DGS-1248T-B1-MIB |
| 1.3.6.1.4.1.171.10.76.6.11.8.1.3 | configMirrorTXSrc | DGS-1248T-B1-MIB |