DGS-1224T-DX-MIB :: configMirrorRXSrc

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS-1224T-DX-MIB › configMirrorRXSrc

configMirrorRXSrc

Module: DGS-1224T-DX-MIB

OID (symbolic): DGS-1224T-DX-MIB::configMirrorRXSrc

OID (numeric): 1.3.6.1.4.1.171.10.76.5.11.8.1.4

Node type: OBJECT-TYPE

Type: PortList

Access: read-write

Description: When mirroring is enabled , this identifies the RX mirroring source port.This value has a valid range of 1 to ifNumber when enbaled.Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc.Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.

What is configMirrorRXSrc?

A bitmap of ports whose received (inbound) traffic is copied to the mirror/monitor port, using the same 8-ports-per-octet, high-bit-is-lowest-port encoding as configMirrorTXSrc. Used to feed ingress traffic from selected ports to a packet capture tool.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.76.5.11.8.1.4
snmpwalk -v2c -c public <target> DGS-1224T-DX-MIB::configMirrorRXSrc

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.76.5.11.8.1.4.1
snmpget -v2c -c public <target> DGS-1224T-DX-MIB::configMirrorRXSrc.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.76.5.11.8.1.4.1 s <value>

Start monitoring D-Link DGS-1224T managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-1224T-DX-MIB::configMirrorRXSrc OID value, configure state conditions and alerts, and monitor any D-Link DGS-1224T managed switch from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
1.3.6.1.4.1.171.10.76dlink_DGS12XXTSeriesProdDGS-1216T-DX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.10.76.5dgs_1224tdxDGS-1224T-DX-MIB
1.3.6.1.4.1.171.10.76.5.11companyConfigGroupDGS-1224T-DX-MIB
1.3.6.1.4.1.171.10.76.5.11.8configMirrorTableDGS-1224T-DX-MIB
1.3.6.1.4.1.171.10.76.5.11.8.1configMirrorEntryDGS-1224T-DX-MIB
1.3.6.1.4.1.171.10.76.5.11.8.1.4configMirrorRXSrcDGS-1224T-DX-MIB