DGS-1224T-DX-MIB :: configJumboEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DGS-1224T-DX-MIB › configJumboEnable

configJumboEnable

Module: DGS-1224T-DX-MIB

OID (symbolic): DGS-1224T-DX-MIB::configJumboEnable

OID (numeric): 1.3.6.1.4.1.171.10.76.5.11.43

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Enable/Disable Jumbo Frame function. Maximum Length of jumbo frame is 10240 bytes.

What is configJumboEnable?

Enables or disables jumbo frame support (up to 10240 bytes) on the switch. Turning this on is typically needed to avoid fragmentation on storage or backup links that already send oversized frames end to end.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.76.5.11.43
snmpwalk -v2c -c public <target> DGS-1224T-DX-MIB::configJumboEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.76.5.11.43.1
snmpget -v2c -c public <target> DGS-1224T-DX-MIB::configJumboEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.76.5.11.43.1 i <value>

Start monitoring D-Link DGS-1224T managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DGS-1224T-DX-MIB::configJumboEnable OID value, configure state conditions and alerts, and monitor any D-Link DGS-1224T managed switch from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
1.3.6.1.4.1.171.10.76dlink_DGS12XXTSeriesProdDGS-1216T-DX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.10.76.5dgs_1224tdxDGS-1224T-DX-MIB
1.3.6.1.4.1.171.10.76.5.11companyConfigGroupDGS-1224T-DX-MIB
1.3.6.1.4.1.171.10.76.5.11.43configJumboEnableDGS-1224T-DX-MIB