DES3018-L2MGMT-MIB :: swL2TrafficCtrlBMStromthreshold

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DES3018-L2MGMT-MIB › swL2TrafficCtrlBMStromthreshold

swL2TrafficCtrlBMStromthreshold

Module: DES3018-L2MGMT-MIB

OID (symbolic): DES3018-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold

OID (numeric): 1.3.6.1.4.1.171.11.63.2.2.11.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlUcastStromCtrl objects whether is enabled) will active storm control. Whenever a port reaches its configured amount of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will start forwarding that type of packet.

What is swL2TrafficCtrlBMStromthreshold?

The packet-rate threshold, 64-1024000 (in thousands of packets per second), above which the enabled storm-control types (broadcast, multicast, and/or unicast, per swL2TrafficCtrlBcastStromCtrl and its siblings) start dropping traffic on this port/unit until the one-second interval expires.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.63.2.2.11.1.1.3
snmpwalk -v2c -c public <target> DES3018-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.63.2.2.11.1.1.3.1
snmpget -v2c -c public <target> DES3018-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.63.2.2.11.1.1.3.1 i <value>

Start monitoring D-Link DES-3018 switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES3018-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold OID value, configure state conditions and alerts, and monitor any D-Link DES-3018 switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.11dlink_mgmtDES2218-MIB
1.3.6.1.4.1.171.11.63des30xxSeriesProdDLINK-SWPRIMGMT-MIB
1.3.6.1.4.1.171.11.63.2des3018DLINK-SWPRIMGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.11.63.2.2swL2MgmtMIBDES3018-L2MGMT-MIB
1.3.6.1.4.1.171.11.63.2.2.11swL2TrafficMgmtDES3018-L2MGMT-MIB
1.3.6.1.4.1.171.11.63.2.2.11.1swL2TrafficCtrlTableDES3018-L2MGMT-MIB
1.3.6.1.4.1.171.11.63.2.2.11.1.1swL2TrafficCtrlEntryDES3018-L2MGMT-MIB
1.3.6.1.4.1.171.11.63.2.2.11.1.1.3swL2TrafficCtrlBMStromthresholdDES3018-L2MGMT-MIB