DES3010g-L2MGMT-MIB :: swL2DevCtrlLLDPState

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › DES3010g-L2MGMT-MIB › swL2DevCtrlLLDPState

swL2DevCtrlLLDPState

Module: DES3010g-L2MGMT-MIB

OID (symbolic): DES3010g-L2MGMT-MIB::swL2DevCtrlLLDPState

OID (numeric): 1.3.6.1.4.1.171.11.63.1.2.2.1.2.23

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For receiving LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table.

What is swL2DevCtrlLLDPState?

Read-write global toggle for LLDP (Link Layer Discovery Protocol). When enabled, the switch transmits LLDP advertisements out its ports and learns neighbor information into its LLDP neighbor table; when disabled, LLDP frames are neither sent nor processed (per-port LLDP settings further refine this).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.63.1.2.2.1.2.23
snmpwalk -v2c -c public <target> DES3010g-L2MGMT-MIB::swL2DevCtrlLLDPState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.63.1.2.2.1.2.23.1
snmpget -v2c -c public <target> DES3010g-L2MGMT-MIB::swL2DevCtrlLLDPState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.63.1.2.2.1.2.23.1 i <value>

Start monitoring D-Link DES-3010G Layer 2 managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES3010g-L2MGMT-MIB::swL2DevCtrlLLDPState OID value, configure state conditions and alerts, and monitor any D-Link DES-3010G Layer 2 managed switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.11dlink_mgmtDES2218-MIB
1.3.6.1.4.1.171.11.63des30xxSeriesProdDLINK-SWPRIMGMT-MIB
1.3.6.1.4.1.171.11.63.1des3010DLINK-SWPRIMGMT-MIB
1.3.6.1.4.1.171.11.63.1.2des3010gDLINK-SWPRIMGMT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.11.63.1.2.2swL2MgmtMIBDES3010g-L2MGMT-MIB
1.3.6.1.4.1.171.11.63.1.2.2.1swL2DevMgmtDES3010g-L2MGMT-MIB
1.3.6.1.4.1.171.11.63.1.2.2.1.2swL2DevCtrlDES3010g-L2MGMT-MIB
1.3.6.1.4.1.171.11.63.1.2.2.1.2.23swL2DevCtrlLLDPStateDES3010g-L2MGMT-MIB