All MIBs › DES3010FL-L2MGMT-MIB › swL2TrafficCtrlBMStromthreshold
swL2TrafficCtrlBMStromthreshold
Module: DES3010FL-L2MGMT-MIB
OID (symbolic): DES3010FL-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold
OID (numeric): 1.3.6.1.4.1.171.11.63.4.2.11.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlUcastStromCtrl objects whether is enabled) will active storm control. Whenever a port reaches its configured amount of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will start forwarding that type of packet.
What is swL2TrafficCtrlBMStromthreshold?
Sets the broadcast/multicast/unknown-unicast storm-control threshold, in thousands of packets per second, from 64 to 1024000; whichever of swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl, or swL2TrafficCtrlUcastStromCtrl is enabled determines which traffic type this threshold applies to. Once a port exceeds this rate within a one-second interval the switch starts dropping that traffic type until the interval expires, so admins tune this to protect the network from broadcast storms while still allowing normal bursts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.63.4.2.11.1.1.3 snmpwalk -v2c -c public <target> DES3010FL-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.63.4.2.11.1.1.3.1 snmpget -v2c -c public <target> DES3010FL-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.63.4.2.11.1.1.3.1 i <value>
Start monitoring D-Link DES-3010FL switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES3010FL-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold OID value, configure state conditions and alerts, and monitor any D-Link DES-3010FL switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.63 | des30xxSeriesProd | DLINK-SWPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.63.4 | des3010fl | DLINK-SWPRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.63.4.2 | swL2MgmtMIB | DES3010FL-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.4.2.11 | swL2TrafficMgmt | DES3010FL-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.4.2.11.1 | swL2TrafficCtrlTable | DES3010FL-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.4.2.11.1.1 | swL2TrafficCtrlEntry | DES3010FL-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.4.2.11.1.1.3 | swL2TrafficCtrlBMStromthreshold | DES3010FL-L2MGMT-MIB |