All MIBs › DES3010FL-L2MGMT-MIB › swL2DevInfoFrontPanelLedStatus
swL2DevInfoFrontPanelLedStatus
Module: DES3010FL-L2MGMT-MIB
OID (symbolic): DES3010FL-L2MGMT-MIB::swL2DevInfoFrontPanelLedStatus
OID (numeric): 1.3.6.1.4.1.171.11.63.4.2.1.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This object is a set of system LED indications. The two octets is defined as system LED. The first LED is power LED. The
second LED is console LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED.
Link/Activity LED :
The most significant bit is used for blink/solid: 8 = The LED blinks.
The second significant bit is used for link status:
1 = link fail.
2 = link pass.
Speed LED :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
The four remaining bits are currently unused and must be 0.
What is swL2DevInfoFrontPanelLedStatus?
This octet string encodes the switch's front-panel LED indicators: the first two bytes cover the power and console LEDs, and the remaining bytes cover each port's Link/Activity and Speed LEDs in pairs. An admin would poll this to build a visual/remote representation of chassis LED state without physically looking at the unit, for example decoding byte pairs to show port 1 is linked at 100Mbps with activity blinking.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.63.4.2.1.1.5 snmpwalk -v2c -c public <target> DES3010FL-L2MGMT-MIB::swL2DevInfoFrontPanelLedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.63.4.2.1.1.5.1 snmpget -v2c -c public <target> DES3010FL-L2MGMT-MIB::swL2DevInfoFrontPanelLedStatus.1
Start monitoring D-Link DES-3010FL switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES3010FL-L2MGMT-MIB::swL2DevInfoFrontPanelLedStatus OID value, configure state conditions and alerts, and monitor any D-Link DES-3010FL switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.63 | des30xxSeriesProd | DLINK-SWPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.63.4 | des3010fl | DLINK-SWPRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.63.4.2 | swL2MgmtMIB | DES3010FL-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.4.2.1 | swL2DevMgmt | DES3010FL-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.4.2.1.1 | swL2DevInfo | DES3010FL-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.4.2.1.1.5 | swL2DevInfoFrontPanelLedStatus | DES3010FL-L2MGMT-MIB |