All MIBs › DES3010F-L2MGMT-MIB › swL2TrafficCtrlBMStromthreshold
swL2TrafficCtrlBMStromthreshold
Module: DES3010F-L2MGMT-MIB
OID (symbolic): DES3010F-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold
OID (numeric): 1.3.6.1.4.1.171.11.63.1.1.2.11.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlUcastStromCtrl objects whether is enabled) will active storm control. Whenever a port reaches its configured amount of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will start forwarding that type of packet.
What is swL2TrafficCtrlBMStromthreshold?
Read-write threshold (64-1024000, in Kbps/pps depending on firmware) setting the storm-control trigger rate for whichever of broadcast/multicast/unicast-lookup-failure storm control is enabled on that port; once traffic exceeds this rate for a second, the switch drops further packets of that type until the interval passes. Admins tune this down to react to smaller storms faster, or up to avoid false triggers on legitimate bursty traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.63.1.1.2.11.1.1.3 snmpwalk -v2c -c public <target> DES3010F-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.63.1.1.2.11.1.1.3.1 snmpget -v2c -c public <target> DES3010F-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.11.63.1.1.2.11.1.1.3.1 i <value>
Start monitoring D-Link DES-3010F switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES3010F-L2MGMT-MIB::swL2TrafficCtrlBMStromthreshold OID value, configure state conditions and alerts, and monitor any D-Link DES-3010F switch from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.63 | des30xxSeriesProd | DLINK-SWPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1 | des3010 | DLINK-SWPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1.1 | des3010f | DLINK-SWPRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.63.1.1.2 | swL2MgmtMIB | DES3010F-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1.1.2.11 | swL2TrafficMgmt | DES3010F-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1.1.2.11.1 | swL2TrafficCtrlTable | DES3010F-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1.1.2.11.1.1 | swL2TrafficCtrlEntry | DES3010F-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1.1.2.11.1.1.3 | swL2TrafficCtrlBMStromthreshold | DES3010F-L2MGMT-MIB |