All MIBs › DES3010F-L2MGMT-MIB › swL2DevInfoFrontPanelLedStatus
swL2DevInfoFrontPanelLedStatus
Module: DES3010F-L2MGMT-MIB
OID (symbolic): DES3010F-L2MGMT-MIB::swL2DevInfoFrontPanelLedStatus
OID (numeric): 1.3.6.1.4.1.171.11.63.1.1.2.1.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This object is a set of system LED indications. The two octets is defined as system LED. The first LED is power LED. The
second LED is console LED. The other octets following the second octets are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED.
Link/Activity LED :
The most significant bit is used for blink/solid: 8 = The LED blinks.
The second significant bit is used for link status:
1 = link fail.
2 = link pass.
Speed LED :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
The four remaining bits are currently unused and must be 0.
What is swL2DevInfoFrontPanelLedStatus?
Read-only octet string encoding the switch's front-panel LED states: the first two bytes are the power and console LEDs, and each subsequent pair of bytes covers one logical port's Link/Activity LED and Speed LED. Poll it to build a visual status panel or to detect a link-down condition without querying ifOperStatus per port; for example a port pair reading 2/01 means link is up and running at 10 Mbps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.11.63.1.1.2.1.1.5 snmpwalk -v2c -c public <target> DES3010F-L2MGMT-MIB::swL2DevInfoFrontPanelLedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.11.63.1.1.2.1.1.5.1 snmpget -v2c -c public <target> DES3010F-L2MGMT-MIB::swL2DevInfoFrontPanelLedStatus.1
Start monitoring D-Link DES-3010F switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES3010F-L2MGMT-MIB::swL2DevInfoFrontPanelLedStatus OID value, configure state conditions and alerts, and monitor any D-Link DES-3010F switch from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.11 | dlink_mgmt | DES2218-MIB |
| 1.3.6.1.4.1.171.11.63 | des30xxSeriesProd | DLINK-SWPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1 | des3010 | DLINK-SWPRIMGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1.1 | des3010f | DLINK-SWPRIMGMT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.11.63.1.1.2 | swL2MgmtMIB | DES3010F-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1.1.2.1 | swL2DevMgmt | DES3010F-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1.1.2.1.1 | swL2DevInfo | DES3010F-L2MGMT-MIB |
| 1.3.6.1.4.1.171.11.63.1.1.2.1.1.5 | swL2DevInfoFrontPanelLedStatus | DES3010F-L2MGMT-MIB |