DES-1228P-MIB :: staticAutoLearning

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DES-1228P-MIB › staticAutoLearning

staticAutoLearning

Module: DES-1228P-MIB

OID (symbolic): DES-1228P-MIB::staticAutoLearning

OID (numeric): 1.3.6.1.4.1.171.10.75.3.21.2

Node type: OBJECT-TYPE

Type: PortList

Access: read-write

Description: The set of the device's member ports that belong to the Static MAC auto learning enable/disable. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is in auto learning enable state; the port is not in auto learning state if its bit has a value of '0'.

What is staticAutoLearning?

A PortList bitmap indicating which ports have static-MAC auto-learning enabled ('1') versus disabled ('0'), letting the switch automatically populate static MAC entries as it sees traffic on those ports.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.75.3.21.2
snmpwalk -v2c -c public <target> DES-1228P-MIB::staticAutoLearning

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.75.3.21.2.1
snmpget -v2c -c public <target> DES-1228P-MIB::staticAutoLearning.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.75.3.21.2.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> staticAutoLearning.1

Start monitoring D-Link DES-1228P PoE smart switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES-1228P-MIB::staticAutoLearning OID value, configure state conditions and alerts, and monitor any D-Link DES-1228P PoE smart switch from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
1.3.6.1.4.1.171.10.75dlink_FESmartSwitchDES-1226G-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.10.75.3des_1228pa1DES-1228P-MIB
1.3.6.1.4.1.171.10.75.3.21companyStaticGroupDES-1228P-MIB
1.3.6.1.4.1.171.10.75.3.21.2staticAutoLearningDES-1228P-MIB