DES-1228P-MIB :: lldpAntiRoguePortControl

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DES-1228P-MIB › lldpAntiRoguePortControl

lldpAntiRoguePortControl

Module: DES-1228P-MIB

OID (symbolic): DES-1228P-MIB::lldpAntiRoguePortControl

OID (numeric): 1.3.6.1.4.1.171.10.75.3.24.2

Node type: OBJECT-TYPE

Type: PortList

Access: read-write

Description: When LLDP anti-rogue port control is enabled , this identifies the port control status of each port. This value has a valid range of 1 to ifNumber when enbaled. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.

What is lldpAntiRoguePortControl?

A PortList bitmap enabling ('1') or disabling ('0') LLDP anti-rogue port control per port, a feature that uses LLDP to detect and block unauthorized/rogue switches or APs plugged into those ports.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.75.3.24.2
snmpwalk -v2c -c public <target> DES-1228P-MIB::lldpAntiRoguePortControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.75.3.24.2.1
snmpget -v2c -c public <target> DES-1228P-MIB::lldpAntiRoguePortControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.75.3.24.2.1 s <value>

Start monitoring D-Link DES-1228P PoE smart switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES-1228P-MIB::lldpAntiRoguePortControl OID value, configure state conditions and alerts, and monitor any D-Link DES-1228P PoE smart switch from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
1.3.6.1.4.1.171.10.75dlink_FESmartSwitchDES-1226G-MIB
Numeric OIDNameModule
1.3.6.1.4.1.171.10.75.3des_1228pa1DES-1228P-MIB
1.3.6.1.4.1.171.10.75.3.24companyLLDPExtnGroupDES-1228P-MIB
1.3.6.1.4.1.171.10.75.3.24.2lldpAntiRoguePortControlDES-1228P-MIB