All MIBs › DES-1228-MIB › igsLeaveProcessInterval
igsLeaveProcessInterval
Module: DES-1228-MIB
OID (symbolic): DES-1228-MIB::igsLeaveProcessInterval
OID (numeric): 1.3.6.1.4.1.171.10.75.2.22.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is the interval (in seconds) after which a Leave message is forwarded on either router port(if present) or on all ports of a bridge (if no router port present).
when a leave message from a host for a group is received by the bridge, The bridge will form a group-specific query and sends it on the port on which the leave message is received. A timer is started by a bridge with a time interval equal to IgsLeaveProcessInterval.
If a report message is received before above timer expires, Leave message is dropped.Otherwise Leave message is either forwarded on all ports of the bridge or only on router port depending upon the case.
What is igsLeaveProcessInterval?
igsLeaveProcessInterval is the number of seconds the switch waits after sending a group-specific query in response to an IGMP Leave, before actually stopping forwarding to that port if no report arrives. A shorter interval speeds up how quickly the switch reclaims multicast bandwidth after the last member leaves a group.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.75.2.22.1.7 snmpwalk -v2c -c public <target> DES-1228-MIB::igsLeaveProcessInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.75.2.22.1.7.1 snmpget -v2c -c public <target> DES-1228-MIB::igsLeaveProcessInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.75.2.22.1.7.1 i <value>
Start monitoring D-Link DES-1228 smart switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DES-1228-MIB::igsLeaveProcessInterval OID value, configure state conditions and alerts, and monitor any D-Link DES-1228 smart switch from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.10 | dlink_products | DES-1226G-MIB |
| 1.3.6.1.4.1.171.10.75 | dlink_FESmartSwitch | DES-1226G-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.10.75.2 | des_1228a1 | DES-1228-MIB |
| 1.3.6.1.4.1.171.10.75.2.22 | companyIgsGroup | DES-1228-MIB |
| 1.3.6.1.4.1.171.10.75.2.22.1 | igsSystem | DES-1228-MIB |
| 1.3.6.1.4.1.171.10.75.2.22.1.7 | igsLeaveProcessInterval | DES-1228-MIB |