All MIBs › DECHUB900-CHASSIS-MIB-V3-0 › chasSlotResetAll
chasSlotResetAll
Module: DECHUB900-CHASSIS-MIB-V3-0
OID (symbolic): DECHUB900-CHASSIS-MIB-V3-0::chasSlotResetAll
OID (numeric): 1.3.6.1.4.1.36.2.18.11.1.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to reset, restore, and test all active modules in the chassis.
Modules which are managed by the DECagent90 may only be reset using the DECagent90's MIB. This object may be used to reset, restore, and test all DEChub900 modules and some DEChub90 modules which reside in the DEChub900 chassis.
When read, the value 'unknown(1) is returned.
Setting this object to 'resetAllModules(2)' has the same affect as setting the chasSlotModuleAdminStatus of each entry in the chasSlotTable, except the entry for the Hub manager itself, to 'reset(4)'.
Setting this object to 'resetAllModulesAndMgr(3)' has the same affect as setting the chasSlotModuleAdminStatus of each entry in the chasSlotTable to 'reset(4)'. Since the Hub Manager is reset, no SNMP response is sent when this object is set to resetAllModulesAndMgr(3).
Setting this object to 'resetAllModulesToDefaults(2)' has the same affect as setting the chasSlotModuleAdminStatus of each entry in the chasSlotTable, except the entry for the Hub manager itself, to 'restore-to-defaults(5)'.
Setting this object to 'resetAllModulesAndMgrToDefaults(3)' has the same affect as setting the chasSlotModuleAdminStatus of each entry in the chasSlotTable to 'restore-to-defaults(5)'. Since the Hub Manager is reset, no SNMP response is sent when this object is set to resetAllModulesAndMgr(3).
What is chasSlotResetAll?
A read-write control to bulk reset/restore every active module in the chassis at once: resetAllModules(2) resets all but the Hub Manager, resetAllModulesAndMgr(3) resets everything including the manager (no SNMP reply follows), and the ...ToDefaults(4/5) variants also wipe non-volatile settings first. An admin would use resetAllModulesAndMgr(3) as a last-resort full chassis reboot when troubleshooting a stuck hub.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.1.1.1.1.7 snmpwalk -v2c -c public <target> DECHUB900-CHASSIS-MIB-V3-0::chasSlotResetAll
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.1.1.1.1.7.1 snmpget -v2c -c public <target> DECHUB900-CHASSIS-MIB-V3-0::chasSlotResetAll.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.11.1.1.1.1.7.1 i <value>
Start monitoring DEC DEChub 900 modular hub chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-CHASSIS-MIB-V3-0::chasSlotResetAll OID value, configure state conditions and alerts, and monitor any DEC DEChub 900 modular hub chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1 | mgmtAgent | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.1 | mgmtAgentVersion1 | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.1.1 | chassis | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.1.1.1 | chasSlot | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.1.1.1.7 | chasSlotResetAll | DECHUB900-CHASSIS-MIB-V3-0 |