All MIBs › DECHUB900-CHASSIS-MIB-V3-0 › chasSlotModuleAdminStatus
chasSlotModuleAdminStatus
Module: DECHUB900-CHASSIS-MIB-V3-0
OID (symbolic): DECHUB900-CHASSIS-MIB-V3-0::chasSlotModuleAdminStatus
OID (numeric): 1.3.6.1.4.1.36.2.18.11.1.1.1.1.6.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Provides the administratively desired state of the given module.
A disabled module is activated by writing a value of enable(2).
A slot may be de-activated by writing a value of disable(3). A disabled slot is available for subsequent activation.
Writing a value of reset(4) specifies that the model initiate a reset sequence.
Writing a value of restore-to-defaults(5) specifies that the module restore all of its non-volatile parameters to their factory default state and reset the module.
Agent support of the writing of any of the values of this object is implementation-specific. For example, this object might be read only for slots that disabling would compromise the integrity of the chassis.
What is chasSlotModuleAdminStatus?
A read-write control for the module in this slot: write enabled(2) to activate a disabled module, disabled(3) to deactivate it, reset(4) to trigger a reset, or restore-to-defaults(5) to wipe its non-volatile config and reset it. An admin would set this to reset(4) remotely to power-cycle a misbehaving line card without visiting the site.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.1.1.1.1.6.1.9 snmpwalk -v2c -c public <target> DECHUB900-CHASSIS-MIB-V3-0::chasSlotModuleAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.11.1.1.1.1.6.1.9.1 snmpget -v2c -c public <target> DECHUB900-CHASSIS-MIB-V3-0::chasSlotModuleAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.11.1.1.1.1.6.1.9.1 i <value>
Start monitoring DEC DEChub 900 modular hub chassis with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECHUB900-CHASSIS-MIB-V3-0::chasSlotModuleAdminStatus OID value, configure state conditions and alerts, and monitor any DEC DEChub 900 modular hub chassis from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.36 | dec | CMU-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36.2.18.11 | decHub900 | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1 | mgmtAgent | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.1 | mgmtAgentVersion1 | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.1.1 | chassis | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.1.1.1 | chasSlot | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.1.1.1.6 | chasSlotTable | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.1.1.1.6.1 | chasSlotEntry | DECHUB900-CHASSIS-MIB-V3-0 |
| 1.3.6.1.4.1.36.2.18.11.1.1.1.1.6.1.9 | chasSlotModuleAdminStatus | DECHUB900-CHASSIS-MIB-V3-0 |