Description: A matrix is expressed using a shorthand that says what input ports can talk to what output ports.

An examples of a specification is: 1.1,2.1-14.2:1.1-14.2; 2.2:5.3,6.4; 10.3:;

Semicolons separate expressions. Within each expression, the colon has a left hand side and a right hand side. Front panel ports on the left hand side can send packets to front panel ports on the right hand side. Commas separate items in a list of front panel ports. Hyphens are short-hand for specifying a range of numbers. If there is no right hand side, the front panel ports on the left cannot send packets to any front panel port (unless the matrix is combined with some some other matrix in a filter specification, or unless the filter is overridden).

Front panel port numbers are of the form (slot.connector), where slot is the slot number the module is plugged into, and connector is the connector number specified on the front of the card.

A matrix will read back in a form equivalent to the form written. It may not read back exactly as written.

No single matrix defines whether a packet arriving on a port is forwarded to its destination. Various destination address, source address, protocol, and default filtering specifications are combined to determine whether the packet is forwarded.

If the ebrNportMatrixFppnValue is changed, all filters using it are immediately updated.

Managers may not specify both ebrNportMatrixValue and ebrNportMatrixFppnValue at the same time to set an entry in this table.