All MIBs › DEC-ATM-CHASSIS-MIB › decAtmConfigStatus
decAtmConfigStatus
Module: DEC-ATM-CHASSIS-MIB
OID (symbolic): DEC-ATM-CHASSIS-MIB::decAtmConfigStatus
OID (numeric): 1.3.6.1.4.1.36.2.18.30.1.12.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to control the reading and writing of Nvram. When read, the value (1) is returned if no decAtmConfigStatus action has been initiated since the last reboot. If a 'start-read' operation has been initiated, then a 'start-read-inprogress' will be returned until the start-read is complete, then a 'start-read-complete' will be returned. If a 'start-write' operation has been initiated, then a 'start-write-inprogress' will be returned until the start-write is complete, then a 'start-write-complete' will be returned.
When set to start-read(2) the device initiates a TFTP read operation to read the saved Nvram image. When set to start-write(3) the device checks to ensure that the file name that the Nvram image will be saved in does not exist. If this test is successful, a TFTP write operation will save the configuration.
What is decAtmConfigStatus?
Controls and reports NVRAM configuration backup/restore over TFTP: writing start-read(2) fetches a saved configuration, start-write(3) saves the current configuration to the named file (after checking it doesn't already exist), and the object itself reflects progress states like start-read-inprogress(4) or terminal outcomes like read-error(8)/write-error(9). Admins use this to back up or restore a switch's configuration to or from a TFTP server.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.36.2.18.30.1.12.1.9 snmpwalk -v2c -c public <target> DEC-ATM-CHASSIS-MIB::decAtmConfigStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.36.2.18.30.1.12.1.9.1 snmpget -v2c -c public <target> DEC-ATM-CHASSIS-MIB::decAtmConfigStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.36.2.18.30.1.12.1.9.1 i <value>
Start monitoring Digital Equipment Corporation (DEC) ATM switch chassis (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DEC-ATM-CHASSIS-MIB::decAtmConfigStatus OID value, configure state conditions and alerts, and monitor any Digital Equipment Corporation (DEC) ATM switch chassis (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.36 | dec | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2 | ema | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18 | decMIBextension | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18.30 | decAtmChassisMIB | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18.30.1 | decAtmChassisMIBObjects | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18.30.1.12 | decAtmUpgradeSoftware | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18.30.1.12.1 | decAtmLoad | DEC-ATM-CHASSIS-MIB |
| 1.3.6.1.4.1.36.2.18.30.1.12.1.9 | decAtmConfigStatus | DEC-ATM-CHASSIS-MIB |