All MIBs › DE1500-MIB › basicHubReset
basicHubReset
Module: DE1500-MIB
OID (symbolic): DE1500-MIB::basicHubReset
OID (numeric): 1.3.6.1.4.1.171.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
What is basicHubReset?
A read-write control: setting it to reset(2) causes the hub to perform a reset/reboot, while noReset(1) is the normal idle state. Use with caution since writing reset(2) will disrupt all traffic passing through the hub while it restarts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.2.1.8 snmpwalk -v2c -c public <target> DE1500-MIB::basicHubReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.2.1.8.1 snmpget -v2c -c public <target> DE1500-MIB::basicHubReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.2.1.8.1 i <value>
Start monitoring D-Link DE1500 series network device (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DE1500-MIB::basicHubReset OID value, configure state conditions and alerts, and monitor any D-Link DE1500 series network device (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.2 | hubmib | DE1500-MIB |
| 1.3.6.1.4.1.171.2.1 | basicGroup | DE1500-MIB |
| 1.3.6.1.4.1.171.2.1.8 | basicHubReset | DE1500-MIB |