All MIBs › D3I-MIB › d3iTePbActive
d3iTePbActive
Module: D3I-MIB
OID (symbolic): D3I-MIB::d3iTePbActive
OID (numeric): 1.3.6.1.4.1.429.1.43.5.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Enables the Packet Bus Active Trap. Default is disableAll(2).
What is d3iTePbActive?
Controls whether the card sends an SNMP trap, writes only to the local log, does both, or stays silent when the packet bus becomes active; it defaults to disableAll(2), so an admin must explicitly enable it to get notified of this event.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.1.43.5.1.1.2 snmpwalk -v2c -c public <target> D3I-MIB::d3iTePbActive
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.429.1.43.5.1.1.2.1 snmpget -v2c -c public <target> D3I-MIB::d3iTePbActive.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.429.1.43.5.1.1.2.1 i <value>
Start monitoring US Robotics Total Control/NetServer D3I network interface card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the D3I-MIB::d3iTePbActive OID value, configure state conditions and alerts, and monitor any US Robotics Total Control/NetServer D3I network interface card from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.429 | usr | CHS-MIB |
| 1.3.6.1.4.1.429.1 | nas | CHS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.429.1.43 | d3i | D3I-MIB |
| 1.3.6.1.4.1.429.1.43.5 | d3iTe | D3I-MIB |
| 1.3.6.1.4.1.429.1.43.5.1 | d3iTeTable | D3I-MIB |
| 1.3.6.1.4.1.429.1.43.5.1.1 | d3iTeEntry | D3I-MIB |
| 1.3.6.1.4.1.429.1.43.5.1.1.2 | d3iTePbActive | D3I-MIB |