D3I-MIB :: d3iCmdCode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsD3I-MIBd3iCmdCode

d3iCmdCode

Module: D3I-MIB

OID (symbolic): D3I-MIB::d3iCmdCode

OID (numeric): 1.3.6.1.4.1.429.1.43.4.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The value of this object upon commad completion indicates a futher description of what went wrong if the command was unsuccessful. In the case of tests, a bit mapped result of each of the sub-tests performed can be found in the status table.

What is d3iCmdCode?

When a command reported in d3iCmdResult fails, this code gives more detail on why -- for example userInterfaceActive(58) if a console session is blocking the operation, or pendingSoftwareDownload(73) if a firmware download is already in progress.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.429.1.43.4.1.1.8
snmpwalk -v2c -c public <target> D3I-MIB::d3iCmdCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.429.1.43.4.1.1.8.1
snmpget -v2c -c public <target> D3I-MIB::d3iCmdCode.1

Start monitoring US Robotics Total Control/NetServer D3I network interface card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the D3I-MIB::d3iCmdCode OID value, configure state conditions and alerts, and monitor any US Robotics Total Control/NetServer D3I network interface card from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.429usrCHS-MIB
1.3.6.1.4.1.429.1nasCHS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.429.1.43d3iD3I-MIB
1.3.6.1.4.1.429.1.43.4d3iCmdD3I-MIB
1.3.6.1.4.1.429.1.43.4.1d3iCmdTableD3I-MIB
1.3.6.1.4.1.429.1.43.4.1.1d3iCmdEntryD3I-MIB
1.3.6.1.4.1.429.1.43.4.1.1.8d3iCmdCodeD3I-MIB