All MIBs › CXFrameRelayATMIWF-MIB › frpAtmNISapCLPBit
frpAtmNISapCLPBit
Module: CXFrameRelayATMIWF-MIB
OID (symbolic): CXFrameRelayATMIWF-MIB::frpAtmNISapCLPBit
OID (numeric): 1.3.6.1.4.1.495.2.1.6.3.52.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines which value of Cell Loss Priority (CLP) will pass to the ATM cell level if the mode2 of frpAtmNISapDEtoCLPMapping is selected. The object is not valid if the mode1 of frpAtmNISapDEtoCLPMappingmode is selected.
Options: zero (1): The CLP bit will be set to 0 at the ATM cell level.
one (2): The CLP bit will be set to 1 at the ATM cell level.
Default Value: zero
Configuration Changed: operative
What is frpAtmNISapCLPBit?
This object sets the fixed Cell Loss Priority (CLP) value, either zero or one, applied to every ATM cell when frpAtmNISapDEtoCLPMapping is configured to mode2; it has no effect if that object is set to mode1. An admin uses this to decide whether cells from this circuit are marked as high-priority (CLP=0, the default) or discard-eligible (CLP=1) network-wide when using the fixed-mapping mode. For example, setting this to one(2) alongside mode2 on frpAtmNISapDEtoCLPMapping marks all cells from this circuit as lower priority, making them the first candidates for discard during ATM network congestion.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.52.1.6 snmpwalk -v2c -c public <target> CXFrameRelayATMIWF-MIB::frpAtmNISapCLPBit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.3.52.1.6.1 snmpget -v2c -c public <target> CXFrameRelayATMIWF-MIB::frpAtmNISapCLPBit.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.3.52.1.6.1 i <value>
Start monitoring Legacy Crosscomm CX900/CX1000 router (Frame Relay/ATM interworking) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFrameRelayATMIWF-MIB::frpAtmNISapCLPBit OID value, configure state conditions and alerts, and monitor any Legacy Crosscomm CX900/CX1000 router (Frame Relay/ATM interworking) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.3 | cxFrameRelay | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.3.52 | frpAtmNISapTable | CXFrameRelayATMIWF-MIB |
| 1.3.6.1.4.1.495.2.1.6.3.52.1 | frpAtmNISapEntry | CXFrameRelayATMIWF-MIB |
| 1.3.6.1.4.1.495.2.1.6.3.52.1.6 | frpAtmNISapCLPBit | CXFrameRelayATMIWF-MIB |