CXFLT-IPXSAP-MIB :: cxFltIpxSapName

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CXFLT-IPXSAP-MIB › cxFltIpxSapName

cxFltIpxSapName

Module: CXFLT-IPXSAP-MIB

OID (symbolic): CXFLT-IPXSAP-MIB::cxFltIpxSapName

OID (numeric): 1.3.6.1.4.1.495.2.1.6.13.3.1.3

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Determines the IPX SAP name of the Novell server that advertises the SAP type(s) assigned in cxFltIpxSapType. The name must be a valid SAP name as defined by Novell.

Range of Values: 0-48 ASCII characters

Note: If 0 is selected, then all SAP names will be included in this filter.

Default Value: None

Configuration Changed: administrative

What is cxFltIpxSapName?

This value specifies the name of the Novell server whose SAP advertisements this filter entry targets, working alongside cxFltIpxSapType to narrow the filter down to a specific server rather than every server advertising that service type. An admin enters this to filter SAP traffic from one particular named server, or leaves it unset to match all servers advertising the configured SAP type. For example, entering "FS-ACCOUNTING" as the SAP name would restrict this filter entry to that specific file server's advertisements rather than every file server on the network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.13.3.1.3
snmpwalk -v2c -c public <target> CXFLT-IPXSAP-MIB::cxFltIpxSapName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.13.3.1.3.1
snmpget -v2c -c public <target> CXFLT-IPXSAP-MIB::cxFltIpxSapName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.13.3.1.3.1 s <value>

Start monitoring Aastra ConvertedX (CX) WAN router (IPX SAP filtering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXFLT-IPXSAP-MIB::cxFltIpxSapName OID value, configure state conditions and alerts, and monitor any Aastra ConvertedX (CX) WAN router (IPX SAP filtering) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.495memotecMEMOTEC-SMI
1.3.6.1.4.1.495.2memotecProductsMEMOTEC-SMI
1.3.6.1.4.1.495.2.1cxProductMEMOTEC-SMI
1.3.6.1.4.1.495.2.1.6cxApplicationCXProduct-SMI
1.3.6.1.4.1.495.2.1.6.13cxIpxCXProduct-SMI
Numeric OIDNameModule
1.3.6.1.4.1.495.2.1.6.13.3cxFltIpxSapTableCXFLT-IPXSAP-MIB
1.3.6.1.4.1.495.2.1.6.13.3.1cxFltIpxSapEntryCXFLT-IPXSAP-MIB
1.3.6.1.4.1.495.2.1.6.13.3.1.3cxFltIpxSapNameCXFLT-IPXSAP-MIB