All MIBs › CXCFG-IPX-MIB › cxCfgIpxPortSpxWatchSpoof
cxCfgIpxPortSpxWatchSpoof
Module: CXCFG-IPX-MIB
OID (symbolic): CXCFG-IPX-MIB::cxCfgIpxPortSpxWatchSpoof
OID (numeric): 1.3.6.1.4.1.495.2.1.6.13.1.2.1.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines whether SPX Watchdog Spoofing is enabled (on). SPX Watchdog Spoofing is a software technique that limits the number of SPX Watchdog frames that are sent over a WAN; the technique is intended to decrease the use of expensive WAN lines without disturbing overall network use.
If SPX Watchdog Spoofing is desired, the remote peer must also have this parameter on.
Options: On (1): SPX Watchdog Spoofing is enabled.
Off (2): SPX Watchdog Spoofing is disabled.
Default Value: off (2)
Configuration Changed: Administrative
What is cxCfgIpxPortSpxWatchSpoof?
Determines whether SPX Watchdog Spoofing is enabled on this port, locally answering SPX keepalive frames to reduce the volume sent over an expensive WAN link; off by default, and the remote peer must also enable it. An admin enables this alongside its IPX counterpart to further reduce WAN keepalive overhead for SPX-based sessions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.13.1.2.1.20 snmpwalk -v2c -c public <target> CXCFG-IPX-MIB::cxCfgIpxPortSpxWatchSpoof
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.495.2.1.6.13.1.2.1.20.1 snmpget -v2c -c public <target> CXCFG-IPX-MIB::cxCfgIpxPortSpxWatchSpoof.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.495.2.1.6.13.1.2.1.20.1 i <value>
Start monitoring Legacy Crosscomm routing equipment (IPX config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CXCFG-IPX-MIB::cxCfgIpxPortSpxWatchSpoof OID value, configure state conditions and alerts, and monitor any Legacy Crosscomm routing equipment (IPX config) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.495 | memotec | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2 | memotecProducts | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1 | cxProduct | MEMOTEC-SMI |
| 1.3.6.1.4.1.495.2.1.6 | cxApplication | CXProduct-SMI |
| 1.3.6.1.4.1.495.2.1.6.13 | cxIpx | CXProduct-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.13.1 | cxCfgIpx | CXCFG-IPX-MIB |
| 1.3.6.1.4.1.495.2.1.6.13.1.2 | cxCfgIpxPortTable | CXCFG-IPX-MIB |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1 | cxCfgIpxPortEntry | CXCFG-IPX-MIB |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.20 | cxCfgIpxPortSpxWatchSpoof | CXCFG-IPX-MIB |