All MIBs › CUMULUS-POE-MIB › portPower
portPower
Module: CUMULUS-POE-MIB
OID (symbolic): CUMULUS-POE-MIB::portPower
OID (numeric): 1.3.6.1.4.1.40310.3.2.1.9
Node type: OBJECT-TYPE
Type: MilliValue
Access: read-only
Description: The portPower represents the port power usage in milliwatts. An integer like 50400 should be divided by 1000 for a value of 50.4 Watts.
What is portPower?
This value reports the actual power being consumed by the connected device on this port, measured in milliwatts. An admin totals these across ports to reconcile against poeTotalUsedPower and spot which specific device is drawing unexpectedly high power. A reading of 12900 equals 12.9 watts, consistent with an IEEE 802.3af class 3 device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40310.3.2.1.9 snmpwalk -v2c -c public <target> CUMULUS-POE-MIB::portPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40310.3.2.1.9.1 snmpget -v2c -c public <target> CUMULUS-POE-MIB::portPower.1
Start monitoring Cumulus Networks switch (Power over Ethernet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CUMULUS-POE-MIB::portPower OID value, configure state conditions and alerts, and monitor any Cumulus Networks switch (Power over Ethernet) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40310 | cumulusMib | CUMULUS-SNMP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40310.3 | poeMIBObjects | CUMULUS-POE-MIB |
| 1.3.6.1.4.1.40310.3.2 | poeObjectsTable | CUMULUS-POE-MIB |
| 1.3.6.1.4.1.40310.3.2.1 | poeObjectsEntry | CUMULUS-POE-MIB |
| 1.3.6.1.4.1.40310.3.2.1.9 | portPower | CUMULUS-POE-MIB |