All MIBs › CUMULUS-POE-MIB › portCurrent
portCurrent
Module: CUMULUS-POE-MIB
OID (symbolic): CUMULUS-POE-MIB::portCurrent
OID (numeric): 1.3.6.1.4.1.40310.3.2.1.8
Node type: OBJECT-TYPE
Type: MilliValue
Access: read-only
Description: The portCurrent represents the port current in milliamps. An integer like 50400 should be divided by 1000 for a value of 50.4 Amps.
What is portCurrent?
This value reports the current being drawn by the powered device on this port, in milliamps. An admin monitors it to catch a device pulling excessive current, which can signal a fault or an overloaded device. A reading of 600, for example, would mean the device is drawing 0.6 amps.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.40310.3.2.1.8 snmpwalk -v2c -c public <target> CUMULUS-POE-MIB::portCurrent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.40310.3.2.1.8.1 snmpget -v2c -c public <target> CUMULUS-POE-MIB::portCurrent.1
Start monitoring Cumulus Networks switch (Power over Ethernet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CUMULUS-POE-MIB::portCurrent OID value, configure state conditions and alerts, and monitor any Cumulus Networks switch (Power over Ethernet) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.40310 | cumulusMib | CUMULUS-SNMP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.40310.3 | poeMIBObjects | CUMULUS-POE-MIB |
| 1.3.6.1.4.1.40310.3.2 | poeObjectsTable | CUMULUS-POE-MIB |
| 1.3.6.1.4.1.40310.3.2.1 | poeObjectsEntry | CUMULUS-POE-MIB |
| 1.3.6.1.4.1.40310.3.2.1.8 | portCurrent | CUMULUS-POE-MIB |