All MIBs › CTATX-MIB › srtbProto
srtbProto
Module: CTATX-MIB
OID (symbolic): CTATX-MIB::srtbProto
OID (numeric): 1.3.6.1.4.1.97.3.34.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Bit mapped representation of srtb protocol configuration.
What is srtbProto?
This is a bit-mapped value representing which protocols are configured for source-route bridging on this device. It tells an admin which protocol types are enabled to be bridged using source-route bridging logic. An admin enabling only IP traffic to use source-route bridging would set the corresponding bit in srtbProto while leaving other protocol bits off.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.34.1 snmpwalk -v2c -c public <target> CTATX-MIB::srtbProto
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.34.1.1 snmpget -v2c -c public <target> CTATX-MIB::srtbProto.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.34.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> srtbProto.1
Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::srtbProto OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.3 | ecs_1 | CTATX-MIB |
| 1.3.6.1.4.1.97.3.34 | srtb | CTATX-MIB |
| 1.3.6.1.4.1.97.3.34.1 | srtbProto | CTATX-MIB |