All MIBs › CTATX-MIB › srepeaterExtendedStats
srepeaterExtendedStats
Module: CTATX-MIB
OID (symbolic): CTATX-MIB::srepeaterExtendedStats
OID (numeric): 1.3.6.1.4.1.97.3.16.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When enabled(1), the rptrMonitorGroup, rptrMonitorPort, and rptrAddrTrack tables are available, and the CEIOM maintains frame-by-frame tallies for the repeater in order to support these tables. Bridging performance may be slightly degraded due to the extra processing required, although the effect will not ordinarily be noticeable. When disabled(2), the rptrMonitorGroup, rptrMonitorPort, and rptrAddrTrack tables are not available.
What is srepeaterExtendedStats?
This read-write enumerated INTEGER, when enabled(1), turns on the rptrMonitorGroup, rptrMonitorPort, and rptrAddrTrack tables and has the CEIOM maintain frame-by-frame tallies to support them, at a typically unnoticeable cost to bridging performance; disabled(2) turns these tables off. An admin enables this when they need detailed per-port and per-address repeater monitoring statistics for troubleshooting, accepting a small performance tradeoff. Enabling srepeaterExtendedStats would be done before a deep-dive investigation into which specific MAC addresses are generating traffic on a shared repeater segment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.16.1.1.3 snmpwalk -v2c -c public <target> CTATX-MIB::srepeaterExtendedStats
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.16.1.1.3.1 snmpget -v2c -c public <target> CTATX-MIB::srepeaterExtendedStats.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.16.1.1.3.1 i <value>
Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::srepeaterExtendedStats OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.3 | ecs_1 | CTATX-MIB |
| 1.3.6.1.4.1.97.3.16 | srepeater | CTATX-MIB |
| 1.3.6.1.4.1.97.3.16.1 | srepeaterTable | CTATX-MIB |
| 1.3.6.1.4.1.97.3.16.1.1 | srepeaterEntry | CTATX-MIB |
| 1.3.6.1.4.1.97.3.16.1.1.3 | srepeaterExtendedStats | CTATX-MIB |