All MIBs › CTATX-MIB › sprotoNetbiosTranslate
sprotoNetbiosTranslate
Module: CTATX-MIB
OID (symbolic): CTATX-MIB::sprotoNetbiosTranslate
OID (numeric): 1.3.6.1.4.1.97.3.17.1.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies whether, when bridging Netbios packets which are source-routing explorer frames, the routing information is to be stripped or propagated. If pass- Rif(1), the frame is bridged as is, with route- discovery proceeding as expected. If stripRif(2), then the routing information field is stripped before being propagated. This option allows non-source-routing (e.g., Ethernet) Netbios hosts to communicate tran- sparently. If passBoth(3), then both the original source-routed frame and the transparent equivalent are propagated. This choice provides maximum connectivity at some expense in network traffic. None(4) is identical to passRif.
This option applies only to token ring ports.
What is sprotoNetbiosTranslate?
This read-write enumerated INTEGER controls whether routing information is stripped or preserved when bridging Netbios source-routing explorer frames, with passRif keeping the frame as-is, stripRif removing routing info for non-source-routing hosts, and passBoth forwarding both variants. An admin sets this to stripRif(2) when Ethernet-attached Netbios hosts need to communicate transparently with source-routed Netbios hosts on a Token Ring segment. Setting sprotoNetbiosTranslate to stripRif(2) allows Ethernet NetBIOS clients to see and respond to broadcasts from Token Ring NetBIOS hosts without needing source-route awareness.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.17.1.1.18 snmpwalk -v2c -c public <target> CTATX-MIB::sprotoNetbiosTranslate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.17.1.1.18.1 snmpget -v2c -c public <target> CTATX-MIB::sprotoNetbiosTranslate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.17.1.1.18.1 i <value>
Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::sprotoNetbiosTranslate OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.3 | ecs_1 | CTATX-MIB |
| 1.3.6.1.4.1.97.3.17 | sproto | CTATX-MIB |
| 1.3.6.1.4.1.97.3.17.1 | sprotoTable | CTATX-MIB |
| 1.3.6.1.4.1.97.3.17.1.1 | sprotoEntry | CTATX-MIB |
| 1.3.6.1.4.1.97.3.17.1.1.18 | sprotoNetbiosTranslate | CTATX-MIB |